Keeping Your Battery Clean To Always Be Safe



Did you ever have to jump start your car only to realize that the battery was mired in crud? If you were wondering what the glop was, it was battery decay, formed by acid condensation. You can easily clean this by using a simple chemical solution. A typical household product, specifically baking soda, is able to clean battery acid very easily. Cleaning up your battery isn't very difficult to carry out but you should take necessary precautions.

The first thing you need to do is to get the necessary supplies, which you may already have at home. The standard tools you'll need are a pair of safety glasses to protect your eyes, adjustable pliers and a screwdriver with insulated handles, a stiff bristled brush, and the key component, baking soda. Additionally, you will need open-end and box wrenches, a scraper either metal or plastic, cleaning brushes for the battery terminal and a turkey baster or small funnel. Several sponges or maybe clean cloths, a spray bottle with all-purpose household cleaner, some rubber gloves and a large bucket of clean water. This can seem like a lot of things for cleaning a battery, but we did point out doing it safely.

You will need the safety glasses and rubber gloves to safeguard yourself from the sulfuric acid that's contained in the corrosive deposits. It is advisable to always keep this compound away from your car, mainly because it can eat away the paint. According to the amount of dirt and decay on the battery, the cleaning can vary, and some of the steps might More Help not be necessary. If you would like the battery to get very clean, you will need to remove the battery from the vehicle. For this initial cleaning, you work with the scraper and the bristle brush to remove as much of the dirt and corrosion as you can.

The next phase is usually to make a mixture of one tablespoon of baking soda to a pint of water, and take the turkey baster, and carefully apply the solution to the outside of the battery, along with the cable connections. After that you can use the bristle brush to loosen and remove the build up from the battery and you want to remove the cables so that cleaning will be easier. When you are disconnecting the electric battery, be sure to use the pliers or wrenches to loosen the connection and guide them off with negative first then positive. Brush aside every last bit of decay from the terminals and all of the parts, and then flush each one with the baking soda solution.

Now apply the liquid cleaner inside the spray bottle, and a sponge to get rid of the remaining dirt and grease. Next, dry off all the components with a clean cloth and reassemble everything plus be sure that the cable is connected positive first. At last, be certain that everything is attached and now you have a clean and safe battery.

Leave a Reply

Your email address will not be published. Required fields are marked *